Reset procedure

This procedure resets the configuration to the default parameters, discarding all current settings. The internal software is not reinstalled and the firmware version does not change.

How to reset: 

- make sure Huddle Hub is up and running

- locate the Restore button on the back of the unit

- press the Restore button and keep pressed for 5 seconds

- the unit will now reboot with default parameters


Restore procedure

This procedure completely wipes the current firmware and does a full firmware reinstallation. The firmware version changes to the one originally installed on the unit (and it's then updated if connected to the internet).

How to restore: 

- make sure Huddle Hub is off

- locate the Restore button on the back of the unit

- switch on Huddle Hub by plugging the power cable or pressing the Power button (without pressing Restore)

- now press the Restore button and keep pressed for 5 seconds

- the unit will now reboot and reinstall the system, please allow a few minutes for this operation